Learning About the Important Laws Related to Gib Stopping

While various companies implement different methods of GIB stopping, certain laws are universal and need to be followed to get the best overall results. These rules related to GIB fixing are important in the creation of a better-looking, longer-lasting finish.

By understanding these rules implemented by GIB stopping in Auckland services, you’ll know what to look for when hiring a GIB fixer and therefore will be able to ask better questions during the hiring procedure. Such a practice will aid you in separating the professionals from the amateurs and thereby spot any bad practices as well.

The Essential Must-Know Laws Related To GIB Stopping

1. GIB Needs To Be Fixed In A Certain Way To Avoid Light Falling Across Joints

GIB plasterboard must be fixed in such a manner that it prevents light from directly running across the joints of the GIB plasterboard. This can easily be done by fixing the sheets in such a manner that the joints run in a similar direction as the main light source, inside your home.

Most of the time, GIB is fixed horizontally on the walls. However, sometimes the light source can fall vertically on the walls, such as in darker or smaller rooms. Thereby, in situations like these, GIB fixing needs to be done vertically.

2. Lower The Use Of Cut Joints

Cut or butt joints are formed when two non-tapering ends meet together at the same place. For minimizing the butt joints, it’s always better to opt for the largest practical sheet you can obtain in the current market. This will ensure that you don’t have to deal with cut joints.

Most GIB professional fixers follow the official guidelines and instructions, so there shouldn’t be any problem even when installing large sheets. In case of cut joints are not avoidable, it’s better to minimise their existence by placing them above windows or doors. The main aim, in this case, is to make the joints less visible to the naked eyes.

3. Back-Blocking For Stairwells And Ceiling Joints

The process of back-blocking stabilises and strengthens the required joints between two plasterboard sheets. Places where three or even four plasterboard sheets are used, back-blocking is done to improve their stability. All ceilings and stairway walls are back-blocked, which minimizes any chances of timber contraction or expansion.

It should be noted that not all builders deploy the back-blocking procedure and instead plan to proceed with standard adhesives. On the other hand, using back-blocks will ensure the creation of a stronger bond between the materials due to the adhesive being a plaster-based compound. This is the only correct method to use for GIB fixing and is highly recommended as well.


What do you think?

Written by Lauren Williamson

Leave a Reply