in

7 Easy Steps to Hang a Metal Wall Art

Metal wall art is a way of representing personal style and add a new charm to your room. For any piece of art, how you put it plays a significant role in adding to its beauty. Same goes with metal wall arts as well. Knowing how to hand a metal wall art is important for design purpose. Here’s a look at the step-by-step guide for hanging the metal wall art:

What do you need?

Before going ahead with the process, collect the following items so that your task becomes easier.

  • Hanger
  • Screwdriver/ drill
  • Wooden screws/ nails
  • Measure tape
  • Pencil
  • Stud finder

    1.   Pick a strong hanger

You would need a strong device to hold your wall art as it should be able to sustain the weight of the piece. Some wall arts come with hangers while for others you need to buy one on your own. It is recommended to buy a picture wire or sawtooth bar.

    2.   Find a stud in the wall

As the metal wall art is a heavier piece than other artwork, you must mount the wall art at a safe place. If you directly hand it on drywall or plaster, there are chances of a damaged wall.

Turn on your stud finder tool and put it close on the wall. Glide the device on the wall in a horizontal direction. When a stud is found, you would see the light. You can mark the place with a pencil.

    3.   Mark the area you wish to hand the wall art

When you find a stud, you exactly know the vertical line where you can hang the artwork. Choose the spot carefully and mark it so that it is not lost when you try to hang the artwork.

    4.   Hanger placement

For placing the artwork on the wall at the location where you want, you must determine how low the wire or hook is located on the back of the art piece. Measure the distance from hook or wire to the top of the wall art and record the measurement for further reference.

    5.   Mark the hanging spot

You already have a pencil mark made in step 3. Now moving downwards, measure the distance noted in step 4. Mark a new spot in a way that it can be differentiated from the previous marking.

    6.   Screw the hanger

Take a screwdriver and secure the screw in the wall at the location you have marked in step 5. Take a screw that is long enough to penetrate the stud in the wall leaving enough space to hang the artwork.

    7.   Hang the artwork

Now, carefully hand the wall art on the hanger. Before releasing it, make sure that full weight of the wall art is secured on the screw/ nail. Adjust the artwork if you find it tilting on one side.

If you are looking for the highest quality custom product with minute attention to the details, the metal wall art Australia is the ideal choice for you. You can get beautiful and long-lasting piece of wall art at an affordable price.

What do you think?

1 point
Advocate

Written by Sofia Jaxon

Years Of Membership

One Comment

Leave a Reply

Leave a Reply