How to Refurbish Your Alloy Wheels at Home?

Purchasing new wheels can be a significant dent in your pocket. However, refurbishing them won’t even cost a fraction of it

Refurbishing alloy wheels is a brilliant way of reinventing their look and making them run the extra mile with ease. If you are tired of your old-looking wheels, then we are here to help you revamp them.

Take a look at the post below for some brilliant insights on alloy wheels refurbishment at home. Read on.

1. Clean the Wheels

The first step is to remove the wheels and clean them thoroughly. Alloy wheels smudged with grime, dirt, and dust will interfere with the final results.

Use soapy water and a sponge to get rid of all the dirt and filth. However, you can also use specialised wheel cleaning solutions for removing the brake dirt. Make sure that none of it is left behind on the wheels when you move to the next step.

2. Sand

No matter how great your wheels look, sanding is crucial to smoothen the entire wheel and prepare it for the next step.

Using coarse sandpaper should work well in your favour. Whether the area is too damaged or just needs a little touch-up, sanding will be of great help. Make sure that you test the sandpaper on a small area to see the results.

If you have damaged areas that require filling, then you can use a filler spray or filling putty to your aid. Once the area is filled and dry, use sandpaper to even the surface.

3. Prime and Paint

Next in line is the priming and painting.

Commence the priming by washing the wheel to clean off any remaining dust from the sanding. Once it is tidy and dry, shake the spray can and prime the entire surface. We are talking 2-3 coats here for a near-professional finish.

Once the primer has completely dried off, get started with the painting job. Ensure smooth motions and always paint from a distance. Once you have begun with painting, you can’t think of sanding, priming or cleaning anymore so be careful.

4. Sealing

If you are happy and satisfied with the paint job, then leave it to dry for over 48 hours and then seal it with a wheel sealant. This process will ensure the longevity of your alloy wheel refurbishment in Chigwell.

5. Final Touch

Once you have completed the entire process, put your wheels back on the car and enjoy the fruit of your labour!

See, it’s that simple. However, if you don’t have a knack for perfection, you should probably let the experts of alloy wheel refurbishment in Chigwell complete the job for you. Whether you do it yourself or hire specialists, make sure you make a decision you won’t regret.


What do you think?

Written by CaitlynBell

Leave a Reply