Virily Editor
Do you normally design furniture and other wooden structures at home on your own? Then you will know the importance of a miter saw. There are basically 3 types of miter saws in the market that can be found at www.mitersawbuzz.com. Choosing the right one is entirely based on your needs and budget. If you are not a professional, then opting for the best makes no sense. It is also important for you to know that you need to practice proper safety measures before operating a miter saw. Always read, understand, and follow the various safety measures that are mentioned on the manual.
Seven Sliding Compound Miter Saw Tips
Operating a miter saw is not as simple as you may think. Here are 7 simple yet effective tips when it comes to operating a miter saw.
- Tune Your Miter Saw: Whenever you buy a new miter saw, always make sure to check for accuracy of the saw. These saws are set at their manufacturing units. However, these can easily come out of any adjustments during shipping. Even when your saw kicks back after hitting a knot in the wood, you should check for accuracy of the saw.
- Replace The Blade: It is needless to say that the greater the number of teeth in a saw blade the cleaner and crisper will be the cuts made by the machine. Such types of blades are suitable for cutting wood pieces for any DIY furniture. However, when it comes to cutting studs in order to build a house, you need a blade with fewer teeth.
- Trim the Ends: Buy any wood from the factory and you will notice that it is not perfect at all. Very seldom will you come across a board that is perfectly square. In order to improve the quality of any furniture you wish to make, you will have to square the end of a wooden board before cutting it into pieces.
- Leave the Line: One of the most important mantra when it comes to using a miter saw is to leave the line. This means not to cut on the line, which will help you fine tune any cut, especially when you wish the board to be slightly shorter.
- Full Stop: After making a cut using your saw, always lower the blade all the way and allow it to come to a full stop before raising the blade. If you do not follow this, the blade will cut on the downswing, as well as, on the upswing changing the length of the cut.
- Make Micro Adjustments Using The Blade: You can easily use the blade to make any micro adjustments in order to make the wooden board of the right length.
- Set A Stop For Any Repetitive Cuts: There are several DIY projects that require repetitive cuts. Instead of measuring each cut repeatedly, you can easily set a stop after measuring once. This will save you a lot of time and effort. Use a scrap wood for the stop clamped to your miter saw.
